Reset Error LEDs v245

[Juergen Schroeder]

Hi,

our v245-Server Solaris 10 powers down, maybe he thinks the temperature are
to high. I restart the server via alom but the LEDs
SYS.LOCATE, SYS.SERVICE, SYS.ACT (warning?) and SYS.OVERTEMP
stays on.

SC> showenvironment
inside alom it shows this:


SYS.LOCATE SYS.SERVICE SYS.ACT
--------------------------------------------------------
FLASHING ON ON

SYS.PSFAIL SYS.OVERTEMP SYS.FANFAIL
--------------------------------------------------------
OFF ON OFF

With 'setlocator off' I can turn SYS.LOCATE of, but the other ones?

Would it help to power off the server some time?

(I found a patch for sol 9 against the problem with overheat, but I have
sol 10.)

TIA

Jürgen

[Cydrome Leader]

Post by Juergen Schroeder
Hi,
our v245-Server Solaris 10 powers down, maybe he thinks the temperature are
to high. I restart the server via alom but the LEDs
SYS.LOCATE, SYS.SERVICE, SYS.ACT (warning?) and SYS.OVERTEMP
stays on.
SC> showenvironment
SYS.LOCATE SYS.SERVICE SYS.ACT
--------------------------------------------------------
FLASHING ON ON
SYS.PSFAIL SYS.OVERTEMP SYS.FANFAIL
--------------------------------------------------------
OFF ON OFF
With 'setlocator off' I can turn SYS.LOCATE of, but the other ones?
Would it help to power off the server some time?
(I found a patch for sol 9 against the problem with overheat, but I have
sol 10.)
TIA
J?rgen

This could be a firmware issues if it's not really overheating.
If you check the update history for v245 firmware you'll see mentions
of this- false overtemp alarms and yellow bezel lights.